Chandrayaan-3 Completes Lunar-bound Manoeuvre, Separation Today: Final Steps Explained

The Launch Vehicle Mark-III (LVM3) M4 vehicle with Chandrayaan-3 at the launch pad at Satish Dhawan Space Centre after the conclusion of a simulation of the entire launch preparation and process, in Sriharikota. (PTI Photo)

The Indian Space Research Organisation (ISRO) announced on Wednesday that the Chandrayaan-3 spacecraft has completed its fifth and final moon-bound manoeuvre, bringing it closer to the lunar surface.

The lunar spacecraft has now completed all of its Moon-bound manouvres and it will now prepare for the separation of the lander module, comprising the lander and rover, from the propulsion module.

“Today’s successful firing, needed for a short duration, has put Chandrayaan-3 into an orbit of 153 km x 163 km, as intended. With this, the lunar-bound maneuvers are completed. It’s time for preparations as the Propulsion Module and the Lander Module gear up for their separate journeys,” ISRO said in a post on X, formerly known as Twitter.

THE JOURNEY SO FAR

Post its launch on July 14, India’s third Moon mission Chandrayaan-3 was revolving farther and farther away from the Earth.

On August 1 in a key manoeuvre, a slingshot move, the spacecraft was sent successfully towards the Moon from Earth’s orbit. Following this trans-lunar injection, the space craft escaped from orbiting the Earth and began following a path that would take it to the vicinity of the Moon.

It entered the lunar orbit on August 5, following which orbit reduction manoeuvres were carried out on August 6, 9 and 14.

SEPARATION OF LANDER FROM THE PROPULSION MODULE

Chandrayaan-3 consists of three parts: a Lander module (LM), Propulsion module (PM) and a Rover. The Lander has the capability to soft land at a specified lunar site and deploy the Rover which will carry out the research on the lunar surface. The Lander and the Rover have scientific payloads to carry out experiments on the lunar surface.

On the other hand, the main function of Propulsion module is to carry the Lander module from launch vehicle injection till final lunar 100 km circular polar orbit. The propulsion module other than carrying the lander and rover configuration till about 100 km lunar orbit, has Spectro-polarimetry of Habitable Planet Earth (SHAPE) payload to study the spectral and polarimetric measurements of the Earth from the lunar orbit.

The separation of the Lander Module from the Propulsion Module is planned for August 17 (Thursday).

WHAT HAPPENS NEXT?

After separation from the Propulsion Module, the lander is expected to undergo a “deboost”, which is a process of slowing down, to place it in an orbit, where the Perilune, closest point to the Moon, is 30 kilometres and Apolune, farthest point from the Moon, is 100 km, from where the soft landing on the south polar region of the Moon will be attempted on August 23.

ISRO Chairman S Somanath recently said the most critical part of the landing is the process of bringing the velocity of the lander from 30 km height to the final landing, and that the ability to transfer the spacecraft from horizontal to vertical direction is the “trick we have to play” here.

Chandrayaan-3 Mission:
Orbit circularisation phase commences

Precise maneuvre performed today has achieved a near-circular orbit of 150 km x 177 km

The next operation is planned for August 16, 2023, around 0830 Hrs. IST pic.twitter.com/LlU6oCcOOb

— ISRO (@isro) August 14, 2023